Wood Impregnation Dying Timber Treatment Autoclave Machine

• After-sales Service: Engineers Available to Service Machinery Overseas
• Warranty: Wood Impregnation Dying Timber Treatment Autoclave
• Smokeless or Not: No
• Structure: Horizontal
• Ordinary Product: Provided
• Machinery Test Report: Provided
• Model NO.: ETA-1200-3000
• Core Components: Motor, Pressure Vessel
• Weight (Kg): 12000 Kg
• Key Selling Points: Easy to Operate
• Applicable Industries: Building Material Shops, Manufacturing Plant, Cons
• Usage: Wood Impregnation
• Voltage: 380V 50Hz
• Working Principle: High Frequency Vacuum Heating
• Color: Customers′ Demand
• Transport Package: as Customers′ Demands
• Specification: Ordinary Product
• Trademark: EVERTECH
• Origin: Qingdao, China
• HS Code: 7309000000
• Production Capacity: 45 Set/Sets Per Month

Product Description

Wood Impregnation Dying Timber Treatment Autoclave Machine

Product Description

 

Product Parameters

Model	Oversize(mm)			Diameter	Length	Capacity	D.Pre.	D.Temp	Voltage
	L	W	H	(mm)	(mm)	(m^3)	(Mpa)	(^0C)	(V)
DL1-8A.2	9000	1600	2000	1000	8000	6.28	1.0	-0.098	380
DL1.5-8A.2	9000	2100	2500	1500	8000	14.1	1.0	-0.098	380
DL1.7-8A.2	9000	2300	2700	1700	8000	18.1	1.0	-0.098	380
DL1.7-12A.2	13000	2300	2700	1700	12000	27.2	1.0	-0.098	380

Wood Treatment And Preservation Equipment Vacuum Impregnation Autoclaves can achieve wood dyeing, anticorrosion, drying,degreasing, drying, degreasing, flame retardant, moth-proof and other technological requirements, is an important production equipment in wood building materials processing and furniture plate production.

1.       Initial vacuum: we need to keep the tank vacuum before filling of the wood preservative. And  it will make the wood preservative into wood cells better. The vacuum degree is -79.8~90kpa and the vacuum time is according to different product(normally 15-60 minutes). when the cylinder in vacuum state, a part of air in the wood was taken out, the resistance will reduce when the wood preservative pushed into wood, so the wood preservative will be easy to get into wood cell.

 

2.       Filling of preservative into tank: Add the wood preservative by manual valve when the equipment in vacuum state, to make sure the air which in the same condition was stopped in the wood cells. (the degree of vacuum is up to the size of valve)

 

3.       Boost pressure stage: Begin to boost pressure lowly to 1.0-1.4MPa when the preservative is full of wood tank ,then keep the pressure value until the regulation preservative into the wood.

 

4.       Pressure relief and discharge preservative: Discharge the pressure after the regulation preservative is absorbed. There will be a little recoil phenomenon(5-15%) during the process.

 

5.       Final vacuum: Pumping air from the tank to keep the tank vacuum after the preservative discharged from the tank. The purpose is to extract excess wood preservative to reduce the  phenomenon of oil dripping.

 

6.       Recover atmosphere, then open the door and take out of timbers.

   We have three production lines to meet customers' requirements ,more than 20 senior engineers to design ,skillful welder to process the equipment ,24hours after-sales team to support. Our products have been sold to Russia, French, Peru, Uganda, Tanzania, Kenya and Burma.