| Customization: | Available |
|---|---|
| After-sales Service: | Free Spare Parts, Field Installation |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features and Technical Parameter
1. Frame plate vulcanizing press is composed of hot plates, plates, up and down platforms, piston stroke, hydro-cylinder, hydraulic station and electrical control system. It can be equipped with push-pull mould device to move the mould on the machine.
2. Plates are constituted with welded Q235 steel plates through mechanical ball blast rust removal, spraying zinc rich series paint, shake to remove stress, then transferred into mechanical producing.
Hot plates are obtained by 35# steel plates after normalizing handling and then adopting double scale rolling. It is equipped with a set of electric control valves to realize the automatic adjusting of steaming temperature.
3. Up and down platforms adopts Q235 steel plates. In order to guarantee the make precision, it is applied with automatic cutting baiting, mechanical slicer producing welded groove, carbon dioxide gas shielded welding. It all adopts alloy welding wire welding and after welding takes whole enter into stove to go on the hot treatment to remove the welding stress exhaustively.
Hydro-cylinder adopts ZG270-500 and piston stroke adopts hard cold chilled alloy cast iron. And sealing structure applies the combined structure with double sealing ring and one dustproof ring to guarantee longer service.
4. Electrical control system adopts PLC automatic control to realize automatic closing, opening mould and gas exit equipment. It can also switch into hand control.
5. Before leaving factory, this plate vulcanizing press needs to pass 24 hours' pressure test, pressure maintaining to test the bearing of the hydro-cylinder and piston stroke and guarantee no oil leakage and seeping to avoid unnecessary quality problems.
6. We can design and manufacture all kinds of non-standard plate vulcanizing press according to the customers' definite requirements.
|
Rubber Sheet Moulding Type |
350*350*2 |
400*400*2 |
500*500*2 |
600*600*2 |
750*850*2 |
|
Nominal clamp mould force (MN) |
0.25 |
0.5 |
0.8 |
1.0 |
1.6 |
|
Piston size(mm) |
350*350 |
400*400 |
500*500 |
600*600 |
750*850 |
|
Number of working layer |
2 |
2 |
2 |
2 |
2 |
|
Piston diameter (mm) |
¢150 |
¢200 |
¢250 |
¢300 |
¢360 |
|
Stroke of piston (mm) |
250 |
250 |
250 |
250 |
500 |
|
Distance between hot plate (mm) |
125 |
125 |
125 |
125 |
250 |
|
Unit area pressure of hot plate (Mpa) |
2.1 |
3.1 |
3.2 |
2.78 |
2.5 |
|
Power KW |
2.2 |
2.2 |
2.2 |
2.2 |
3.0 |
|
Overall size(L*W*H) (mm) |
1500*400*1350 |
1800*500*1700 |
1800*550*1600 |
2000*700*1700 |
2000*1000*1900 |
|
Weight (Kgs) |
1000 |
1500 |
2000 |
2600 |
4300 |
|
Close mould speed (mm/s) |
≥12 |
≥12 |
≥12 |
≥12 |
≥12 |
|
Open mould speed (mm/s) |
≥12 |
≥12 |
≥12 |
≥12 |
≥12 |
Loading container & shipping
Qingdao Evertech Industry Co.,Ltd is located in the west coast of Qingdao city. It is a professional enterprise that committed to the production and development of automatic complete sets of inner tube and tire equipment of motorcycles,bicycles,electric cars series.
Our products have been sold to Southeast and Middle Asia, the Middle East, South Africa and North America.
Service after sales
1. One year quality guarantee and long-term technical support.
2. We can train your workers for free. If you need, we can install and assemble the machine in your workshop. And you should pay for the necessary costs, according to the international trade.
Welcome to visit our factory and we'll show you the best machine and service!
Contact:Victoria
Qingdao Evertech Industry co.,Ltd
Address: No.273 Lingshanwan Road, Huangdao District, Qingdao City, China
Postcode:266400
Website:evertech.en.made-in-china.com
){kind=link}