| After-sales Service: | Video Technical/Online Support,Send Engineer |
|---|---|
| Warranty: | 2 Years |
| Control Type: | PLC |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Efficiency Stable Operation Wood Thermo Treatment Plant With Heat Treatment
Thermo Treatment Plant is a product category of pressure vessel produced by our company, this product safety is high, it is design and manufacture according to the law of the People's Republic GB150-2011 "steel pressure vessel" standard, the product must pass a quality supervision,inspection and acceptance by technical Supervision Bureau, andis awarded the inspection certificate, id reliable product for the users. The company is responsible for product design, manufacture, transport,installation, debugging and operator training, the product has reasonable structure design, function is advanced, has the beautiful outlook and applicability, can be dealt with large quantity of wood and wood products, mould proof and moth-proofing, prevent termites, flame retardant dyeing of special equipment. It is also apply to all kinds of anti-corrosion agents, flame retardant agents and dyeing agents, etc. Its principle: the unit used vacuum, compression,heating and so on a series of crafts operation to take off resin of the wood, and made certain concentration mingled with the corrosion resistance, fire resistance, dyeing,vacuum high-pressure injection liquids through wood inside through wood inside the cells, thus plays anticorrosive,mould proof,moth-proofing,prevent termites and protection treatment. The equipment has been achieved the international level.
Production process:
1. Prepare the liquid medicine in the storage tank for use as required by the production process
2, according to the product specification based - all round and select material - loading skip - open the jar - moving drive car with tank - push the skip to tank, tank door - work - vacuum liquid - frequency rehydration, pressure, pressure, discharge pressure, the liquid - after vacuum - unloading - open the tank (after being discharged pressure) -- - inspection.
Ii. Operation sequence:
Vacuum -- macerate -- pressurize -- vacuum -- dry.
Iii. Usage:
1, full cell method: full cell method, also known as full absorption method, it is a preservative full of wood cells preservative process.Generally suitable for water-soluble preservatives (e.g., CCA, ACQ). Wood treated in this way can retain a certain amount of preservatives.
2, high and low frequency compression method: with the repeated atmospheric pressure and pressure cycle of wood antisepsis process called high and low frequency compression method, using this process method to treat wood can make difficult to impregnate wood and wet wood get better antisepsis effect than full cell method.Usually, the depth of the wood will be deeper.This is a kind of wood anticorrosive effect better anticorrosive process, recommended to use.
Iv. Matters needing attention
1, before the work, must check whether the electrical appliances are intact, everywhere valves, pressure gauges, vacuum gauge, level gauge, all kinds of pumps are normal, the damage is replaced.
2. In the process of heating and pressurizing, gradually increase the temperature and pressure, and pay attention to the change of pressure, not exceeding the working pressure specified in the tank.
|
Model
|
Diameter(MM)
|
Length(MM)
|
Pressure(MPA)
|
Vacuum degree
|
|
HK1200*4000
|
1200
|
4000
|
1.25MPA
|
-0.098MPA
|
|
HK1200*6000
|
1200
|
6000
|
||
|
HK1200*8000
|
1200
|
8000
|
||
|
HK1200*10000
|
1200
|
10000
|
||
|
HK1500*4000
|
1500
|
4000
|
||
|
HK1500*6000
|
1500
|
6000
|
||
|
HK1500*8000
|
1500
|
8000
|
||
|
HK1500*10000
|
1500
|
10000
|
||
|
HK1500*12000
|
1500
|
12000
|
||
|
HK1800*4000
|
1800
|
4000
|
||
|
HK1800*6000
|
1800
|
6000
|
||
|
HK1800*8000
|
1800
|
8000
|
||
|
HK1800*12000
|
1800
|
12000
|
||
|
HK2000*6000
|
2000
|
6000
|
||
|
HK2000*8000
|
2000
|
8000
|
||
|
HK2000*15000
|
2000
|
15000
|
Qingdao Evertech Industry Co., Ltd. is a professional pressure vessel designer, manufacturer and exporter. We have manufacturing licenses for ASME U, ASME U2,NB,PED, D1, D2 and A2 pressure vessels. Composed of more than 20 senior experts and professional engineers, the research and development team, with more than 20 years of professional experience, is committed to product design, development and program optimization, and can provide high-quality solutions according to users' requirements in different operating conditions. Company has cover an area of 70000 manufacturing base and 15000 modern manufacturing plants, can provide customers both at home and abroad with composite autoclave, high pressure autoclave, high pressure reactor, AAC autoclave, deaerator, pouring tank pressure vessel products such as more than 800 sets, pressure vessel head more than 20000 sets high quality products and services, won widespread praise.
1.What are the payment terms?
TT,L/C and trade assurance are acceptable,TT will be more appreciated,30% deposit before production,70% balance before shipment.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}