| Customization: | Available |
|---|---|
| After-sales Service: | Free Spare Parts |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | Capacity/ stere | Treat capacity/ stere |
| DN 1200*4000mm | 4.6 | 3.0 |
| DN 1200*6000mm | 6.7 | 4.5 |
|
DN 1200*8000mm |
9.0 | 6.0 |
| DN 1500*4000mm | 7.0 | 4.71 |
| DN 1500*6000mm | 10.5 | 7.0 |
| DN 1500*8000mm | 14 | 9.4 |
| DN 1700*4000mm | 9.0 | 6.0 |
| DN 1700*8000mm | 18.1 | 12 |
| DN 1800*4000mm | 10.1 | 6.78 |
| DN 1800*6000mm | 15.2 | 10.17 |
| DN 1800*8000mm | 20.3 | 13.5 |
| DN 2000*6000mm | 18.8 | 12.5 |
| DN 2000*8000mm | 25 | 16.7 |
| DN 2000*10000mm | 31.4 | 20 |
| DN 2000*18000mm | 56 | 37 |
Technology
1. Initial vacuum: we need to keep the tank vacuum before filling of the wood preservative. And it will make the wood preservative into wood cells better. The vacuum degree is -79.8~90kpa and the vacuum time is according to different product(normally 15-60 minutes). when the cylinder in vacuum state, a part of air in the wood was taken out, the resistance will reduce when the wood preservative pushed into wood, so the wood preservative will be easy to get into wood cell.
2. Filling of preservative into tank: Add the wood preservative by manual valve when the equipment in vacuum state, to make sure the air which in the same condition was stopped in the wood cells. (the degree of vacuum is up to the size of valve)
3. Boost pressure stage: Begin to boost pressure lowly to 1.0-1.4MPa when the preservative is full of wood tank ,then keep the pressure value until the regulation preservative into the wood.
4. Pressure relief and discharge preservative: Discharge the pressure after the regulation preservative is absorbed. There will be a little recoil phenomenon(5-15%) during the process.
5. Final vacuum: Pumping air from the tank to keep the tank vacuum after the preservative discharged from the tank. The purpose is to extract excess wood preservative to reduce the phenomenon of oil dripping.
6. Recover atmosphere, then open the door and take out of timbers.
1.What is the max size can you do?
The max diameter which we can produce is 4.5m.
The length is up to the clients' requirement.
2.How many wood can you treat for one circle ?
It is up to your choose diameter and length
3.How long to finish one circle ?
Generally is 2-3 days. is up to wood's thickness.
4.Is it manual or automatic operation ?
This machine is full automatic type.
5.Can we install the equipment by ourselves?
Of course ,we have full set drawing which will send to you after order
6. lf your engineer is aviliable to oversea to install
Yes ,if you need ,we can arrange the engineer to install for you.
Company Information
We have three production lines to meet customers' requirements ,more than 20 senior engineers to design ,skillful welder to process the equipment ,24hours after-sales team to support. Our products have been sold to Russia, French, Peru, Uganda, Tanzania, Kenya and Burma.
){kind=link}