EPDM Rubber Two Roll Mill / EPDM Rubber Open Mixing Mill

• Customization: Available
• Warranty: 2 Years
• Control Type: PLC
• Model NO.: ZME-7015
• Automatic Grade: Automatic
• Power Source: Electric
• Type: Open Mixing Mill
• Power(Kw): 20kw
• Dimension: 1100*700*1200mm
• Weight: 580kg
• Certification: CS/ISO/ASTM
• After-Sales: Engineers Available to Service Machinery Overseas
• Simply Roll Diameter: 160mm Rubber Open Mixing Mill
• Roll Surface Width: 320mm Rubber Open Mixing Mill
• Front Roll Speed: 9.8m/Min Rubber Open Mixing
• Roller Speed Ratio: 1:1.22 Rubber Open Mixing Mill
• Rubber Open Mixing: 4mm Rubber Open Mixing Mill
• Transport Package: Standard Export Wooden Case.
• Specification: 380V
• Trademark: Evertech
• Origin: Shandong, China (Mainland)
• HS Code: 84778000
• Production Capacity: 500 Set/Sets Per Month

Product Description

ZME-7015  Epdm Rubber Two Roll Mill / Epdm Rubber Open Mixing Mill 

Product Description

Product Description 

Equipment summary:
Epdm Rubber Two Roll Mill / Epdm Rubber Open Mixing Mill   manufactured according to GB / T 13577-2006 and GB 20055-2006 design.
Apply to the compounding of thermoplastics, mastication, or plastic sheeting; rubber thermal 
refining, tablet, mastication, mixing.
 
Applicable industry:
Lab Two Roll Rubber Open Mixing Mill refining presses for thermoplastics compounding, plastic necklace, or plastic sheeting.
 
Technical parameter:

Roller Specification	( Diameter×Length) 160×320mm
Adjustable gap	0~10mm
Roller speed ratio	1:1.22
Roll gap	4mm
Reducer type	BWY22-23-5.5KW
Motor Type	Y132M2-6
Power	5.5kW
Speed	960r/min
Mixing capacity	0.2-5kgs
Roller temperature	normal temperature~260°C
Heating time	normal temperature ~150°C about 15min
Heating mode	electric heating
Temperature accuracy	±3.5°C
The drum in vitro thermometry	the installation of temperature the meter then extend the line to the thermostat temperature measurement digital display
Temperature control	PID controller make in Taiwan
Roller revolving speed	fixed speed(24 revolving/min)
Roller hardness	HRC 50~60(Made in Taiwan)
Roller processing	Polished
Baffle material	PTFE material, made of sharp type
Safety device	Multiple touch touch emergency stop, safe operation
Power	AC380V,20A
Motor power	20KW
Outside dimension	1100×700×1200mm
Weight	about 580kg

 
Structure features:
1)The roller are made of high-carbon steel quenching treatment, the surface of hard wear; 
lumen of processing, the roll surface temperature uniformity.
2)The machine is equipped with internal heating wire device, roller temperature uniformity.
3)Drive system with worm reducer, compact structure, low noise, high efficiency, long service life.
4)The machine overall base, easy to install.
 
Operate steps:
1) Turned on the power , check the machine no-load operation is normal or not , as usual, and then continue to work.
2)Access trays placed Fortunately workbench.
3)Set the temperature and rotational speed of the front and rear rollers.
4)When the temperature reaches the set temperature, refining the material to be put into blocking 
plate between refining.
5)By hand wheel adjustment the gap between the two rolls to obtain products of different thickness, and adjusting
 the distance between the two retaining plate to adjust the product width.
6)Refining completed, clean the machine, turn off the power.


 For detail information,parameters and formal quotation, pls do not hesitate to contact us in time.
 
 
 

Detailed Images

Detailed Images




Company Information