| Customization: | Available |
|---|---|
| Max Diameter of Workpiece: | <500mm |
| Mass Scope of Workpiece: | <900kg |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
What is the Speicification of No Rotor Rubber Moving Die Rheometer?
|
Model: |
Hot Sale China Rubber Tester Rheometer With Rotorless Price |
|
Standard: |
GB/T16584 IS06502 |
|
Temperature: |
room temperature to 200 Centigrade |
|
Heating-up: |
15 Centigrade/min |
|
temperature fluctuation: |
≤ ±0.3 Centigrade |
|
temperature resolution : |
0.1 Centigrade |
|
torque range: |
0-5N.M,0-10N.M,0-20N.M |
|
torque resolution: |
0.001NM |
|
Power: |
50HZ, ~220V±10% |
|
Pressure: |
About 0.4Mpa |
|
Air-pressure requirement: |
0.5Mpa--0.65MPa (user prepare the dia 8 trachea) |
|
Environment temperature : |
10 Centigrade--20 Centigrade |
|
Humidity range: |
55--75%RH |
|
Compressed air: |
0.35-0.40Mpa |
|
Swing frequency : |
100r/min(about 1.67HZ) |
|
Swing angle: |
±0.5 Centigrade ,±1 Centigrade ,±3 Centigrade |
|
Printing: |
Date,time,temperature,vulcanization curve,temperature curve,ML,MH,ts1,ts2,t10,t50,Vc1,Vc2. |
Equipment summary:
Hot Sale China Rubber Tester Rheometer With Rotorless Price is a widely used tester in rubber processing industry, rubber quality control and basic research rubber,
For optimize formula of rubber provide accurate data, It can accurately measure the scorch time, rheometer time, sulfide index, the maximum and minimum torque and other parameters.
Main functions:
Hot Sale China Rubber Tester Rheometer With Rotorless Price used monolithic rotor control, which include: host, temperature measurement, temperature control, data
acquisition and processing, sensors and electrical chains and other components. These measurements, temperature control circuit consists of a temperature control device, platinum resistance, heater composition, capable of automatic tracking power and ambient temperature changes, automatically correct PID parameter
s to achieve fast and accurate temperature control purposes. Data acquisition system and mechanical linkage to complete the rubber vulcanization process of force torch signal automatic detection, automatic real-time display of temperature and settings. After curing, automatic processing, automatic calculation, print
vulcanization curve and process parameters. Show curing time, curing power Ju, also has a variety of audible alert.
RT-101 No Rotor Rubber Moving die rheometer controlled by computer, the computer setting the parameters of the direct control
of test parameters rheometer. Display real-vulcanization curve and temperature curve, store test results,
different adjustable comparison of test results and in a different color.
Features:
1. This instrument is really confined mold cavity, and the United States Alpha (formerly Monsanto) has done. Repeatability, and test data comparable with the Alpha. At the international leading position in the same industry.
2,.The instrument development platform based on large databases, temperature control devices using the
software to directly control and collection and processing. Instrument to overcome the general curing
temperature of the shortcomings of using temperature controller (accuracy poor). The technical leadership
of international new trend.
3. This instrument has statistics, analysis, storage and comparison functions. Humanized design, easy to
operate
4. Using imported high-precision sensors
How it works:
The rubber sample into the mold cavity is almost entirely enclosed and maintained at test temperature,
the mold cavity are of two parts, of which the lower part with a small linear reciprocating movement
(swing oscillation), oscillatory shear specimen produced strain determination is the reaction torque of the
mold cavity (force), this torque (force) depends on the shear modulus of rubber.
Curing test specimens after the start of the shear modulus increases, the computer machine real-time
display and record the torque (force), when the torque (force) rose to a stable value or the maximum as
well as return to the state, they get a torque ( force) and time curve, that is, curing curve (Figure 1), shape
of the curve and test the temperature and plastic material characteristics.
Applicable industry:
Widely used in rubber products industries.
corresponding standard :
Accord with GB/T16584<rubber- no rotor rheometer to measure the characteristics of vulcanized>
ISO6502:1991 and ASTMD5289-95
*Shippment
-By sea
-By plane
-By couriers, TNT, DHL, FEDEX, UPS, etc.
*Standard Export carton
1.Inner Package: Thin plastic film surround the machine;
2.Outer Package: Internationally standard package export safety wooden case.
Qingdao Evertech Industry Co.,Ltd is specialize in rubber and plastic testing machine over 10 years,With our advanced technologies and best customer service, Our product has exported to more than 100 countries and regions,which win favorable comments from customers worldwide.
Our production line have turning machine,griding machine,milling machine,CNC machining center and sheet metal bending machine,design department has 5 people special for design and research new product.With these advantages,we can control product quality from source.
If you have any inquiry or concern,Sales and after service department will reply you within 24 hours.
Q1: How long is the delivery time?
A:Normally 5-10 working days after received deposit,we have our own factory,the delivery time can be adjust flexible.
Q2: What is the warranty for the equipment?
A: One year. We can provide you lifelong technical support.
Q3: What is the payment terms?
A: T/T, L/C, Western Union, etc
Q4: How about the products quality?
A: Our products apply to ISO, ASTM, GB, etc
Q5: Is it OK to print my logo on machine product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q6. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
or 100% L/C at sight .
Q7: Can we test sample before place order?
A: Of course,we can test sample and provide test report to you with free.
){kind=link}