| Customization: | Available |
|---|---|
| Warranty: | 2 Years |
| Control Type: | PLC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Air cooled pvc/pu conveyor belt vulcanizing press
Introduction to the HZ Splice Press
The HZ splice press is an all-in-one solution for splicing thermoplastic conveyor belts (e.g. PVC polyurethane).
No external control box, air pump, or water cooling tank are required.
The HZ presses are provided with electric heating and built in air cooling. The splice process runs fully automated.
• Splice pressure is applied by an internal compressor, max. 2 bar (28 psi)
• Heats up to a splice temperature of max. 200°C (392°F)
• Keeps it at the splice temperature (adjustable dwell time)
• Cools down to the cooling temperature (safe temperature to take the belt out)
• For thicker belts a preheat temperature and preheat dwell time can be applied
• The bottom heating can be set lower or higher than the top heating
• The splice surface is 130 mm ; the heated zone is 110 mm.
If the belt is relatively thick a problem might occur where the outside of the belt is at the splicing temperature too long, waiting for the inside to reach the required temperature. Molten material might flow away or discolor and fabrics might shrink. To avoid this problem from happening, the preheat option can be used. This option heats the belt up (outside and inside) to a temperature just below the melting temperature. After the preheat stage, the inside splice temperature can be reached much quicker, minimizing the risk for unwanted flow of material, discoloring or fabric shrinkage.
The reading of the display relates to the top temperature of the press. If more or less heat is required at the bottom of the belt, the "bottom heat factor" can be used. Please note that this factor relates to a plus or minus amount of heat (%), not to a specific temperature.
HZ presses are available in 5 different sizes:
• 300 mm effective (12")
• 600 mm effective (24")
• 900 mm effective (36")
• 1200 mm effective (48")
• 1500 mm effective (60")
HZ presses function on different voltages
Tool Specification and Parameter
|
Tool Specifications |
HZ300 |
HZ600 |
HZ900 |
HZ1200 |
HZ1500 |
|
Effective length |
305 mm / 12 " |
610 mm / 24 " |
914 mm / 36 " |
1219mm/ 48" |
1524mm/ 60" |
|
Effective width |
130 mm / 5.1 " |
130 mm / 5.1 " |
130 mm / 5.1 " |
130mm/ 5.1" |
130mm/ 5.1" |
|
Weight lower part |
10 kg / 22 lbs |
15 kg / 33 lbs |
20 kg / 44 lbs |
28.5KG/56lbs |
32KG/68lbs |
|
Weight upper part |
11 kg / 24 lbs |
15 kg / 33 lbs |
18 kg / 40 lbs |
25.5KG/50lbs |
30KG/65lbs |
|
Total weight |
21 kg / 46 lbs |
30 kg / 66 lbs |
38 kg / 84 lbs |
54KG/106lbs |
62KG/133lbs |
|
Length |
505 mm / 19.9 " |
805 mm / 31.7 " |
1105 mm / 43.5 " |
1405mm/ 55.3" |
1705mm/ 67.1" |
|
Overall Height |
220 mm / 8.5 " |
220 mm / 8.5 " |
220 mm / 8.5 " |
225mm/ 9" |
225mm/ 9" |
|
Max. pressure |
2 Bar / 28 PSI |
2 Bar / 28 PSI |
2 Bar / 28 PSI |
2bar/28 PSI |
2bar/28 PSI |
|
Max. temperature |
200 °C |
200 °C |
200 °C |
200 °C |
200 °C |
|
Dimensions for transport (L x W x H) |
770 x 370 x 310 mm (30 x 15 x 12 ") |
1070 x 370 x 310 mm (42 x 15 x 12 ") |
1370 x 370 x 310 mm (54 x 15 x 12 ") |
1926 x 370 x 400 mm (68 x 15 x 12") |
1926 x 370 x 400 mm (76 x 146 x 122") |
|
Weight for transport |
26 kg / 57 lbs |
35 kg / 77 lbs |
43 kg / 95 lbs |
84KG/180lbs |
96KG/210lbs |
Place press in the flight case so the end with the power receptacles is facing the storage compartment. This will protect the receptacles from damage when transporting.
Flight cases for the HZ 300-900 have two wheels. HZ1200-1500 are packaged in flight cases with four wheels and an extension handle.
Flight cases can be stacked on top of each other, but need to be secured during transportation.
Standard size of air cooling presses are all in stock.
Our packing way :Export standard (wooden package ) or according to your requirement .
Our Services :
1. We will design,manufacture,install and test the machines according to customers' requirement .Relevant personnel training for customers,ensure that customers fully grasp the use and maintenance of technology.
2 .Our service department listen to customers' feedback at any time and provide spare parts timely.
Welcome to visit our factory and we can show you the machine in working condition:
If our products win your interest, please send us inquires and we will provide detailed information to you. We can also make machines according to your request.
){kind=link}