| Customization: | Available |
|---|---|
| After-sales Service: | Free Spare Parts, Field Installation |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
vulcanizer for rubber curing
The vulcanizing machine are divided into two series: steam vulcanizing boiler series and hot air vulcanizing boiler series. Each series has three heating mediums: steam, electric and conduction oil.
Our equipment which has advantages of stable and reliable performance is the most widely used steam vulcanizing boiler, the temperature, pressure and time can be controlled automatically and it also easy to operate. And the equipment can save 35% of energy than other traditional equipment.
Working principle for steam vulcanizing autoclave
The steam enter into the steam diffusion tube by entrance of steam which at the bottom of the steam vulcanizing boiler and the entrance can be controlled by automatic valve. The steam diffusion tubes vertical arrangement in the bottom of the tank. The small holes which diameters are 3mm,4mm and 5mm on the steam diffusion tube are arranged according to certain rules and angel to ensure that the steam spread in the tank evenly. Thus it can prevent the different quality of the product because of the uneven steam. After set working procedures, the heating, heat preservation, vulcanization and etc can be finished by automatic control system. The equipment stop working and give alarm after all procedures finished.
Working principle for electricity steam vulcanizing autoclave
Electric heated tubes are arranged in the bottom of the tank according to certain rules, the heat exchanger linked the electric heated tubes and the water channel. The height of the sink is 5~15mm. The steam which produced by electric heated tubes and water spread from down to up evenly until turn into condensate water pour into the sink after touched the wall of tank and then heat again. The temperature of the tank evenly and the pressure has no error, so it can prevent the different quality of the product because of the uneven temperature and pressure. After set working procedures, the heating, heat preservation, vulcanization and etc can be finished by automatic control system. The equipment stop working and give alarm after all procedures finished.
Technical parameter
|
Item |
800 |
1200 |
1500 |
1700 |
2000 |
2600 |
|
Inner diameter(mm) |
800 |
1200 |
1500 |
1700 |
2000 |
2600 |
|
Canister length(mm) |
22000 |
3000 |
3000 |
4000 |
5000 |
10000 |
|
Number of lid sawtooth |
12 |
12 |
14 |
14 |
16 |
24 |
|
thickness of lid (mm) |
10 |
10 |
10 |
10 |
16 |
14 |
|
Thickness of the tank body(mm) |
10 |
10 |
10 |
10 |
12 |
14 |
|
Working pressure(Mpa) |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
0.55 |
|
Dimensions(mm) (length*width*height) |
22766*1445 |
4010*1575 |
3960*2150 |
4925*2162 |
6200*2590 |
11722*3360 |
|
Weight(Kg) |
5580 |
2017 |
2950 |
3835 |
6500 |
16775 |
Ranges of application
It is mainly used for rubber tyre retreading, reclaimed rubber desulphurization, wire, cable, tape, rubber rollers and other rubber products vulcanization. styrene-butadiene rubber thermoplastic refining, drying wood, Chinese medicine sterilization, oxidation of aluminum products, carbonization of bamboo products, Also widely used in the gypsum and its products and other materials autoclaving.
We will delivery your goods by LCL/20' FCL/40'FCL depending on your order. Before delivery, our professional engineer will do trial run for each machine to check and confirm everything is workable, you also can come to our factory for testing together with us.when loading, our workers will fix the machine tightly in the container to ensure the safety in the transportation.
Service & Installation
a.) Consultation service before, during, and after sales;b.) Project planning and design services;
b.) Debugging of equipment until everything is functional;
c.) Management of equipment's long distance shipping from seller's factory to named place by buyer;
d.) Training of equipment maintenance and operating personally;
e.) New production techniques and formulas;
f.) Provide 1 year complete warranty and life-time maintenance service.
FAQ
Q: What's the delivery term for making business with us?
A:FOB, CFR & CIF optional; It's mainly depend on client's requirement;
Q: Do you have machines in stock?
A: Yes, but just the small-scale machines. Machines are different with other products, most of the large-scale machines are designed according to our customers' requirements, different customers have different production requirements, so the technical parameter is different for most machines. On the other hands, most of the our machines will cover a large area, so once the machines are finished, we will effect shipment after QC
Q: What's the lead time after placing order ?
A:Usually it takes about 25~30 days after we received your deposit.
However, it would depend on our production line schedule(the timing clients place order)and the complication of the item.
Our equipment can be customized, leave an inquiry to know more details about price, packing, shipping and price.
){kind=link}