0.01MPa Pressure Difference 20 Vacuum Pipe Aerospace Carbon Fiber Autoclave

• Customization: Available
• Customized: Customized
• Certification: CE, FDA, EEC, ISO13485
• Model NO.: 2500*4500
• Automation: Automatic
• Principle: 0.01MPa Pressure Difference
• Structure: Tunnel
• Operation: Continuous
• Energy: Heat Sterilization
• Property: Chemical Sterilization
• Type: Induction Electronics Sterilization Equipment
• Diameter: 500-4500mm
• Length: 1000-20000m
• Design Pressure: 0.5-5.0MPa
• Raising Pressure Speed: 0.1MPa/Min
• Cool Down Speed: 0.5-7 Degree/Min Continouns Adjustment
• Cool Down Ways: Water Cool or Wind Cool
• Point Temperature Difference: +_1.2 Degree
• Model Vacuum Degree: -0.098MPa
• Transport Package: The Shipping Ways Is 40 Flat Rack
• Specification: 150-450 degree
• Trademark: Evertech
• Origin: Qingdao, China
• HS Code: 84778000
• Production Capacity: 5000 Set/Sets Per Year

Product Description

aerospace carbon fiber autoclave

Product instruction

Autoclave can realize temperature ,pressure ,cooling and process parameters timing ,real-time on line controlled equipment .Mainly device into below systems:
1. tightness of tank :it is made from tank ,tank door ,high temperature motor ,air duct heat partition layer to form into one high pressure resistant ,high temperature tank
2. safety interlock : it is made from pressure automatic interlock ,manual interlock ,over pressure alarm device.
3. Quickly open door device :manual or automatic quickly open design ,even If power off ,it can start and close the door
4. Sealing device: the door adopt silica gel filling air ,it can bear 500 degree ,forming into one high temperature high pressure sealed container
5. Pressure system: pressure transfer and control system include air compressor ,storage tank ,pressure control valve ,pipe ,pressure transformer ,and pressure gauge .
6. Heating system: stainless steel heating pipe ,high temperature fan ,wind plate ,insulation layer ,temperature control system .heating power satisfy with inside tank max temperature requirement and raising temperature
7. Temperature circulation system :it made up of circulation fan ,wind plate ,and guide flow cover to improve heating transfer and circulation form into uniform temperature
8. Vacuum system :it made up of vacuum pump ,pipe ,vacuum gauge ,vacuum vale ,to supply composite material vacuum condition
9. Automatic control system: adopt PLD and fuzzy control ,to realize the pressure ,temperature ,cooling and so on full process high -precision control and in time record

Main technology date :

Item	date
Effective diameter	500-5000mm
Effective length	1000-40000mm
Working temperature	100-450 degree
Working pressure	0.5-5.0Mpa
Raising temperation speed	0.1Mpa/min continuous adjustment
Temperature go down speed	+ 0.01Mpa -
Cooling ways	0.5-7 degree/min continuous adjustment
Point difference temperature	0.5-7 degree/min continuous adjustment
Control temperature and test temperature point	Water cool and wind cool
Vacuum degree of cavity	-0.098Mpa (absolutely pressure )
Extra vacuum pipe	Extract 2-20 pipe extract and test is independent
Test vacuum pipe	Test 2-20 pipe extract and test is independent

 

 

type:horizontal ,vertical

heating ways:steam heat ,thermal oil heating ,elecricity heating ,electric heating air

temperature :150-450 degree

pressure:0.6-5.0Mpa

operation ways:automatic

diameter:600-4500mm

length: any length is ok

safety device:automatic discharge pressure ,automatic feed water ,automatic alarm, the door has double safty interlock device

Product Overviews

 

why to choose aerospace carbon fiber industrial autoclave    ?

1.Our ram material is national goverment pointed facmous steel factory ,and standard pressure vessel special plate ,Q345R .Each steel is tested before leaving factory .It have good bear pressure

 

2.heating area is uniform ,according to your working technology to design inside heating system ,we have special design heating sink ,,it is arranged in the up side ,bottom ,left side ,right side ,

 

3.Adopt external insulation ,the galvanized sheet is welded around the tank (it wont rust within 10 years),inside are 80mm insulation cottom ,heat insulation head add 60mm thermal insulation , then add fixed bolt .To make inside heating value  can be used enough ,and reduce consumtion , save cost . and it is easy for transportation.( see below photos )

Packaging & Shipping

Certifications

We have manufature License of special equipment , and design Licen of special equipment ,and quickly open door safety interlocker device

Buyer Feedback

Product Uses

Company Information