| Customization: | Available |
|---|---|
| Power Source: | Electric |
| Process: | Thermal Processing |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Working Principle
water immersion retort principle is based on direct steam injection to heat the water in top tank to the pre-set temperature in combination with continuous circulation of process water and with application of compressed air if necessary, this allows minimizing the sterilization temperature without any risk on damage of the container, which results in the shortest process time and thus a better product quality.
Compressed air can be applied during the complete processing cycle, it can be programmed in accordance to the process requirements and controlled by pneumatic valves for compressed air inlet and pressure relief to ensure the preset pressure in the retort.
On completion of the cooling phase, an end of cycle signal assures the operator that the door can be opened and uploaded. Then prepare for next batch.
| Model No | Outside measurement(mm) | Dia(mm) | Len(mm) | Cap(m3) | Thi(mm) | Pre(Mpa) | Tem(°C) | nWei(kg) | gWei(kg) | Pow(kw) | Vol(V) | ||
| length | width | high | |||||||||||
| PLJ.10-1.B.3 | 1885 | 1200 | 1458 | 1000 | 950 | 1 | 4 | 0.3 | 147 | 560 | 860 | 3.5 | 380 |
| PLJ.10-2.B.3 | 2970 | 1200 | 1458 | 1000 | 1900 | 1.8 | 4 | 0.3 | 147 | 650 | 1250 | 6 | 380 |
| PLJ.12-2.B.3 | 3102 | 1500 | 1660 | 1200 | 1900 | 2.6 | 5 | 0.3 | 147 | 860 | 1400 | 6 | 380 |
| PLJ.12-3.B.3 | 4100 | 1500 | 1780 | 1200 | 2870 | 3.7 | 5 | 0.3 | 147 | 1200 | 1800 | 11.5 | 380 |
| PLJ.12-4.B.3 | 4938 | 1500 | 1660 | 1200 | 3820 | 4.8 | 5 | 0.3 | 147 | 1300 | 2100 | 11.5 | 380 |
| PLJ.13-4.B.3 | 4938 | 1600 | 1880 | 1300 | 3820 | 5.7 | 5 | 0.3 | 147 | 1500 | |||
Factory Show
Packing
Company Information
ET is always devoted to the entire solution of sterilization equipment for food, beverage, pharmaceutical as well as chemical industries; by now ET has grown into a mature enterprise in food industrial equipment, which integrates elements from raw material suupplying, product development, technological design, manufacturing, finished product inspection, engineering transportation to after-sales service providing.
){kind=link}