| Customization: | Available |
|---|---|
| After-sales Service: | Engineers Available to Service Machinery Overseas |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mooney Viscosity,Rubber Mooney Viscosity Tester.Rubber Mooney Viscometer Testing machine
Character:
Mooney Viscometer is used for measuring viscosity and relaxation of base rubber, raw rubber stock or rubber mass prevulcanization properties, it is also used for measuring viscosity in Mooney value for compounded or uncompounded unvulcanized natural, synthetic or regenerated rubber.
This instrument has excellent performances including automatic calibration, higher stability. It can perform the following tests: viscosity, scorch and stress relaxation.
Mooney Viscosity Measurement Instrument,Rubber test Instrument viscosity tester,Rubber Testing machine test Mooney Viscometer
Test standard:
Accord with GB/T1232"Rubber unvulcanized -Determination of mooney viscosity'',GB/T 1233 ''Rubber,unvulcanized-Determination of prevulcanization characteristics-Shearing disk method'',ISO289,ISO667ect.
Mooney Viscosity,Rubber Mooney Viscosity Tester.Rubber Mooney Viscometer Testing machine
Specification:
|
Range of temperature control
|
From room temperature to 200°C |
|
Temperature fluctuation in die |
≤±0.1°C |
|
Temperature display resolution |
0.1°C |
|
Rate of temperature increase |
25°C/min |
|
Measurement range of torque |
0-200 MV |
|
Torque resolution |
0.01MV |
|
Frequency of rotor |
2±0.02r/min |
|
Temperature PID Control |
+/- 0.1°C |
|
Upper & Lower |
Separate plate temperature control |
|
Power supply |
220 V ,1 Phase, 50 Hz |
Mooney Viscosity,Rubber Mooney Viscosity Tester.Rubber Mooney Viscometer Testing machine
Features:
1. Easy to use the instrument.
KJ-A016 have automatic door and all of the electric components are CE corresponding.
2. Temperature can be increased up to 185 within 7.5min, and recovery time when beginning, and recovery time when beginning test will be less 2min. And temperature fluctuation will be within 0.1.
3. All instruments adopted the way of PID to control temperature. The smallest size and weight in all of the same type instrument in the market;
4. The die was designed to international standard ISO.
5. With lower noise when working, ≤55dB.
6. It is following ISO 289 ,ASTM D 1646, JIS K 6300 .
7. Can variable Temperature unit "C, " F Degree.
8.Use window XP program connect to machine & and can setting Mooney or scorch time and show Dynamically Mooney value or scorch time on the graph.
Mooney Viscosity Measurement Instrument,Rubber test Instrument viscosity tester,Rubber Testing machine test Mooney Viscometer
Test Results
Measure of Mooney viscosity (Large rotor):
MI -- initial Mooney viscosity.
ML - The minimum Mooney value in the last 30 seconds before the motor stopped.
Mx-t - Mooney value relating to time t.
x-the time of preheat, t-Mooney test time
Stress Relaxation
MRe - Mooney value at the end of stress relaxation.
TRx - time needed for x% torque stress relaxation.
Xy% - % of Viscosity decay after motor stopped y sec.
The value of exponent a, the constant k, the correlation coefficient r, and the area A .
Graph ( with Viscosity-Time curve and Test temperature curve)
Mooney viscosity graph; Relaxation graph; log Mooney units Versus Log time graph.
Scorch Data testing sample results:
-Scorch time curve
-Temperature curve
-Curve index ( Input small or Large Rotor test
MI - initial Mooney viscosity
ML - Minimum Mooney viscosit
MF - Maximum Mooney viscosity in the end of the test
Mx-t - Mooney value relating to time t.
x-the time of preheat, t-Mooney test time
M5/M3 - ML+5/3 Mooney
M35/M18 - ML+35/18 Mooney
t5/t3 - Mooney burning time, M5/M3 corresponding time, Unit: min.
t35/t18 - Mooney vulcanizing time, ML+35/18 corresponding time, unit: min.
){kind=link}