Electricity Heating Steam Vertical Type Autoclave

Product Details
Customization: Available
Theory: Autoclave
Type: Pressure Steam Sterilization Equipments
Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 USD
Type of Ownership
Limited Company
  • Electricity Heating Steam Vertical Type Autoclave
  • Electricity Heating Steam Vertical Type Autoclave
  • Electricity Heating Steam Vertical Type Autoclave
  • Electricity Heating Steam Vertical Type Autoclave
  • Electricity Heating Steam Vertical Type Autoclave
  • Electricity Heating Steam Vertical Type Autoclave
Find Similar Products

Basic Info.

Model NO.
1200*2000
Certification
CE, FDA, EEC, ISO13485
Electric Tension
380V
LCD Display
With LCD Display
Ultra High Temperature Alarm
Ultra High Temperature Alarm
Sterilization Information Recording and Printing
Sterilization Information Recording and Printing
Material
Carbon Steel
Diameter
500-4500mm
Length
1000-20000m
Design Pressure
0.5-5.0MPa
Raising Pressure Speed
D: 0.1MPa/Min
Cool Down Speed
0.5-7 Degree/Min Continouns Adjustment
Cool Down Ways
Water Cool or Wind Cool
Point Temperature Difference
+_1.2 Degree
Model Vacuum Degree
-0.098MPa
Transport Package
Vertical Type Autoclaveis 20gp, 40FT
Specification
150-450 degree
Trademark
Evertech
Origin
Qingdao, China
HS Code
84778000
Production Capacity
5000 Set/Sets Per Year

Product Description

Product instruction


Autoclave can realize temperature ,pressure ,cooling and process parameters timing ,real-time on line controlled equipment .Mainly device into below systems:
1. tightness of tank :it is made from tank ,tank door ,high temperature motor ,air duct heat partition layer to form into one high pressure resistant ,high temperature tank
2. safety interlock : it is made from pressure automatic interlock ,manual interlock ,over pressure alarm device.
3. Quickly open door device :manual or automatic quickly open design ,even If power off ,it can start and close the door
4. Sealing device: the door adopt silica gel filling air ,it can bear 500 degree ,forming into one high temperature high pressure sealed container
5. Pressure system: pressure transfer and control system include air compressor ,storage tank ,pressure control valve ,pipe ,pressure transformer ,and pressure gauge .
6. Heating system: stainless steel heating pipe ,high temperature fan ,wind plate ,insulation layer ,temperature control system .heating power satisfy with inside tank max temperature requirement and raising temperature
7. Temperature circulation system :it made up of circulation fan ,wind plate ,and guide flow cover to improve heating transfer and circulation form into uniform temperature
8. Vacuum system :it made up of vacuum pump ,pipe ,vacuum gauge ,vacuum vale ,to supply composite material vacuum condition
9. Automatic control system: adopt PLD and fuzzy control ,to realize the pressure ,temperature ,cooling and so on full process high -precision control and in time record

Main technology date :
Item date
Effective diameter 500-5000mm
Effective length 1000-40000mm
Working temperature 100-450 degree
Working pressure 0.5-5.0Mpa
Raising temperation speed 0.1Mpa/min continuous adjustment
Temperature go down speed + 0.01Mpa
-
Cooling ways 0.5-7 degree/min continuous adjustment
Point difference temperature 0.5-7 degree/min continuous adjustment
Control temperature and test temperature point Water cool and wind cool
Vacuum degree of cavity -0.098Mpa (absolutely pressure )
Extra vacuum pipe Extract 2-20 pipe extract and test is independent
Test vacuum pipe Test 2-20 pipe extract and test is independent

 

 

type:horizontal ,vertical

heating ways:steam heat ,thermal oil heating ,elecricity heating ,electric heating air

temperature :150-450 degree

pressure:0.6-5.0Mpa

operation ways:automatic

diameter:600-4500mm

length: any length is ok

safety device:automatic discharge pressure ,automatic feed water ,automatic alarm, the door has double safty interlock device
Electricity Heating Steam Vertical Type Autoclave

Product Overviews
 
why to choose vertical type autoclave ?
 

1.Our ram material is national goverment pointed facmous steel factory ,and standard pressure vessel special plate ,Q345R .Each steel is tested before leaving factory .It have good bear pressure

 

2.heating area is uniform ,according to your working technology to design inside heating system ,we have special design heating sink ,,it is arranged in the up side ,bottom ,left side ,right side ,

 

3.Adopt external insulation ,the galvanized sheet is welded around the tank (it wont rust within 10 years),inside are 80mm insulation cottom ,heat insulation head add 60mm thermal insulation , then add fixed bolt .To make inside heating value  can be used enough ,and reduce consumtion , save cost . and it is easy for transportation.( see below photos )
Electricity Heating Steam Vertical Type Autoclave
Electricity Heating Steam Vertical Type Autoclave
Electricity Heating Steam Vertical Type Autoclave
Packaging & Shipping


Electricity Heating Steam Vertical Type Autoclave

Certifications

We have manufature License of special equipment , and design Licen of special equipment ,and quickly open door safety interlocker device

 

 

Electricity Heating Steam Vertical Type Autoclave
 

Buyer Feedback
Electricity Heating Steam Vertical Type Autoclave

Product Uses
Electricity Heating Steam Vertical Type Autoclave

 

Customer visting

Warmly welcome our customer to visit us
Electricity Heating Steam Vertical Type Autoclave

Accessories

Electricity Heating Steam Vertical Type Autoclave
Company Information
Electricity Heating Steam Vertical Type Autoclave
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier