Vulcanizing Press Used to Splice Rubber Belt Easily

Product Details
Customization: Available
Warranty: 2 Years
Control Type: CNC
Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 USD
Type of Ownership
Limited Company
  • Vulcanizing Press Used to Splice Rubber Belt Easily
  • Vulcanizing Press Used to Splice Rubber Belt Easily
  • Vulcanizing Press Used to Splice Rubber Belt Easily
  • Vulcanizing Press Used to Splice Rubber Belt Easily
  • Vulcanizing Press Used to Splice Rubber Belt Easily
  • Vulcanizing Press Used to Splice Rubber Belt Easily
Find Similar Products

Basic Info.

Model NO.
DSLJ-800
Automatic Grade
Semi-Automatic
Power Source
Electric
Type
Conveyor Belt Joint Vulcanizing Press
Power(Kw)
13.92kw
Dimension(L*W*H)
1592X830X580 mm
Weight
515kg
Certification
ISO9001:2008
After-Sales Service Provided
Engineers Available to Service
Colour
Silvery
Temperature Raise Time
Less Than 20 Minutes
Belt Width
650~2200mm
Cooling Time
5 Minutes
Material
Aluminum Alloy
Transport Package
in Wooden Case or as Your Requirments.
Specification
380v
Trademark
Evertech
Origin
Shandong, China (Mainland)
HS Code
84778000
Production Capacity
60 Set/Sets Per Month

Product Description

vulcanizing press used to splice rubber belt easily

 Usage of Vulcanizer

Model DSLJ Electrothermic Rubber Belt Vulcanizer (following is called "vulcanizer'' for short), has the specialities of small volume, light weight, general three-phase power supply, homogeneous temperature of electrothemic plae. Well-distributed pressure {0-1.8Mpa) supplied by a hydiaulic system, equipping of light automatic control panel, connection of the control panel and the main equipment done by the integrated plug with the multicore cable, easy maintenance, realible working etc.

It is now used widely for the on-site vulcanizing connection of canvas~ nylon, conveyer with steel cable core inside as well as for the connection of rubber belt with special characteristics of anticorrosion and heat resistant under the circumstance of no explosive gas or any harmful gas to corrode the metal~ which is accepted by the metallurgical engineering, mineral production, power station~ harbor machinery architectural working or chemical industry etc.

The quality of the belt connection will influence the working efficiency of the rubber belt or the length of life directly~ especially for the long distance and high-strength conveyer. Therefore, model DSLJ vulcanizer is the necessary accessories for the rubber belt conveyer equipment.

Technical parameters

 We can design and manufacture all kinds of non-standarded machinery according to the costomers' requirement.

Technical Data

1. Pressure of vul: 1.5MPa

2. Temp. of  vul: 145ºC

3. Supface temp. diff. of vul.Plate: ±3ºC

4.Hyperthermic time: >50min (mormal temp. is up to 145ºC)

5.Voltage: 380V,50Hz

6.Output power of control panel: 36KW

7.Temp.~adjusting scope:0~200ºC

8. Time.~adjusting scope: 0~59 min

9.After pressuring the up and down beating    Plates in 0.8 MPa, the gap between the 

Piate is no more than  0.5

Application:

 

Our products are mainly applied to industries for splicing and repairing for conveyor belts such as metallurgy, mine, power plant, port, dock, construction material cement, chemical industry , tobacco ,and food automatic line field

 

Brief Introduction of Main Structure

The vulcanizer is constituted by the following parts.

    l. machine frame. 2.clamps. 3.back-up iron plates. 4.bolt. 5.nuts. 6.washes. 9.heat-proof plates. 10.up heating plates.14.down heating plates.

15.hydraulic plates (the above parts are the constitution of main equipment). 7.high-pressure soft pipe. 8.pressure-testing pump. 11. secondary cables. 12.controi panel. 13.prima-y cable. (please find  the following  drawing in detail)
Vulcanizing Press Used to Splice Rubber Belt Easily

 

Technical Parameters:

1.Machine Maximum size: from 650MM-4200MM;

2.Voltage: 380V 660V 480V 440V 415V 400V or 220V;

3.Fast Cooling time: 5 minutes (from 145 degrees down to 70 degrees or less);

4. Time for temperature raise (from normal temperature to vulcanizing temperature) no more than 50 minutes;

5.Vulcanizing pressure:1.8MPa (details refer to users' specifications and factory markings);

6.Time of heat preservation for vulcanizing could be adjusted according to thickness of the rubber belts;

7. Splicing length of rubber conveyor belt for vulcanizing jointing could be connected together by single or several pieces if necessary;

8. Make clear for model and specification of product and indicate width and tensile strength of rubber conveyor belt as well as tension in kilogram required for vulcanizing jointing when ordering products.

 
9. Users could order spare electric pumps additionally according to requirements.
 
Alternative component:
 
1. with or without water cooling system
2. common pressure bag or rubber aramid type
3. different hot plates
4. two kinds of electric control box

 Machines pictures show:
Vulcanizing Press Used to Splice Rubber Belt Easily
Vulcanizing Press Used to Splice Rubber Belt Easily
Vulcanizing Press Used to Splice Rubber Belt Easily
Vulcanizing Press Used to Splice Rubber Belt Easily
Vulcanizing Press Used to Splice Rubber Belt Easily

FAQ

1. Q: Are you a manufacturer or training company?
A: We are the manufacturer. We have our own plant,worker and 
techniques research developing department.

2 .Q: Where is your factory located? How can I visit there?
A: Our factory add is West Of Waihuan Rd., Beiling, Xiagou Village,
Jiaonan, Qingdao, Shandong, China (Mainland)
Nearest airport is Qingdao liuting international airport
Kindly send plane information in advance, so that we can pick you up at 
the airport, and book hotels as you require.

3. Q: What are your hot sale machine?
A: Our rubber and plastic machines are popular in the foriengn 
market. And main products are rubber mill ,kneacder ,calender,tyre 
recyling plant ,press machine and other machine.

4. Q: How does your factory do regarding quality control?
A: Quality is priority and we have our own quality control 
department. We win make a strick inspectin before the machines leave the 
factory.

5 .Q: Are the technical parameter is fixed?
A: Basically, each model corresponding to the related machine. But 
we can design different type machine according to the client's 
requirement.

6 How to send us your enquiry? Kindly tell me answer
-1 what is your conveyor belt size ? ?
-2 Leave your cellphone? Skype? whatsApp?viber? so that we can talk 
efficiently
Contact Victor for quotation NOW:

 
 
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier