Customization: | Available |
---|---|
After-sales Service: | Engineers Available to Service |
Warranty: | 1 Year |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Customized size Composite Autoclave for Curing carbon fiber
EVERTECH Autoclave is a sealed pressure vessel which can be heated by a forced convection heating unit, where temperature, pressure and vacuum can be controlled effectively. By means of an advanced design, consisting of a forced convection fun and motor unit, output heating power system can be adjusted 0-100%,proportional control of the pressurization, cooling and exhaust components. It can obtain an uniform temperature and pressure according to the process curve. Temperature is check in heating, keeping, and cooling phase. The heating / cooling gradients can be set by operator. Pressure is adjusted in pressurization, keeping, release phase.
Mainly device into below systems
1. tightness of tank :it is made from tank ,tank door ,high temperature motor ,air duct heat partition layer to form into one high pressure resistant ,high temperature tank
2. safety interlock : it is made from pressure automatic interlock ,manual interlock ,over pressure alarm device.
3. Quickly open door device :manual or automatic quickly open design ,even If power off ,it can start and close the door
4. Sealing device: the door adopt silica gel filling air ,it can bear 500 degree ,forming into one high temperature high pressure sealed container
5. Pressure system: pressure transfer and control system include air compressor ,storage tank ,pressure control valve ,pipe ,pressure transformer ,and pressure gauge .
6. Heating system: stainless steel heating pipe ,high temperature fan ,wind plate ,insulation layer ,temperature control system .heating power satisfy with inside tank max temperature requirement and raising temperature
7. Temperature circulation system :it made up of circulation fan ,wind plate ,and guide flow cover to improve heating transfer and circulation form into uniform temperature
8. Vacuum system :it made up of vacuum pump ,pipe ,vacuum gauge ,vacuum vale ,to supply composite material vacuum condition
9. Automatic control system: adopt PLD and fuzzy control ,to realize the pressure ,temperature ,cooling and so on full process high -precision control and in time record.
Model | Effective Diameter | Effective Length | Design Temp. | Design Pressure | Pres. & Depres. Rate | Heating & Cooling Rate |
ET-CA1850 | 1800 mm | 5000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA1860 | 1800 mm | 6000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA1880 | 1800 mm | 8000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA2030 | 2000 mm | 3000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA2040 | 2000 mm | 4000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA2060 | 2000 mm | 6000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA2080 | 2000 mm | 8000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA2550 | 2500 mm | 5000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA2560 | 2500 mm | 6000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA25100 | 2500 mm | 10000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA2880 | 2800 mm | 8000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA3050 | 3000 mm | 5000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA3060 | 3000 mm | 6000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA3080 | 3000 mm | 8000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA30100 | 3000 mm | 10000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA30120 | 3000 mm | 12000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/min |
ET-CA32100 | 3200 mm | 10000 mm | 250-400 °C | 1.2-4.0 MPa | 0-0.1 MPa/min | 0.5-5 °C/mi |
Main application
1. Mainly used for rubber products, hoses, rubber roller and other vulcanization
2. Rubber vulcanizing autoclave is widely cured with rubber products for mechanical properties such as: new tire curing, tire refurbishment, hose, roller, cable, pipe vulcanization
3. Capsules, rubber sheet, rubber gloves, rubber shoes, tape, lined rubber, rubber cloth, rubber and other products vulcanization.
4. Rubber vulcanizing autoclave is also widely used for wood degreasing, hydrolysis, wood dipping, wood shaping, oxidizing, autoclaving, wood cooking, wood impregnation and wood drying, etc.
The autoclave is wrapped in plastic film to protect it from dust.
The outer packing is in wooden case, which can prevent the knock in the process of sea transportation.
We can also pack according to customer's requirements.
Our company is very close to Qingdao port, which is very convenient for delivery.
Qingdao Evertech Industry Co., Ltd. is a professional pressure vessel designer, manufacturer and exporter. We have manufacturing licenses for ASME U, ASME U2,NB,PED, D1, D2 and A2 pressure vessels. Composed of more than 20 senior experts and professional engineers, the research and development team, with more than 20 years of professional experience, is committed to product design, development and program optimization, and can provide high-quality solutions according to users' requirements in different operating conditions. Company has cover an area of 70000 manufacturing base and 15000 modern manufacturing plants, can provide customers both at home and abroad with composite autoclave, high pressure autoclave, high pressure reactor, AAC autoclave, deaerator, pouring tank pressure vessel products such as more than 800 sets, pressure vessel head more than 20000 sets high quality products and services, won widespread praise.
Markets:Mainly sold to Asia,Europe,North America,South America,and other countries.
100% Real Manufacturer
Welcome to send me email any time.
Contact : Victoria