Sand Blasting Booth/Sand Blast Room/Shot Blast System Ce Approved Automatic

• Application: Burnishing, Container / Bottle Cleaning, Deflashin
• Fuel: Electric
• Type: Blasting Room
• Cleanliness: High Cleanliness
• Automation: Automatic
• Certification: CE, CB, CSA, UL
• Model NO.: Q26
• Feature: High Efficiency, Environmental Protection
• Customized: Customized
• Electric Component Brand: Siemens, Schneider, Omron, Mitsubishi
• Specification: Standard Container
• Trademark: Evertech
• Origin: Shandong China(Mainland)
• HS Code: 8460909000
• Production Capacity: 30 Sets/ Month

Product Description

Product description
Sand blasting room is mainly used to handle large parts or structures of special and complex work-piece, to achieve surface cleaning rust, increase the adhesion between the work-piece and coating and other effects. The spray gun installed in the sand blasting room can clean the surface of the parts by using compressed air as power, metal abrasive as blasting agent.
The work-piece is carried by the trolley, and the abrasive can be automatically sorted and automatically removed.
Doors
The service door is built in welded profiles and has a closing in steel plates, and is internally coated with abrasion resistant rubber. An exclusive sealing system prevents the loss of abrasive materials and makes the closing of the doors possible, without effort. Optionally, two doors can be supplied (tunnel type room) and one door for the operator. Sensors connected to the doors automatically interrupt the blasting operation when one of them is opened.
Luminaries
Each LED lamps construction and positioning enable maximum utilization of the luminosity. The fastening system allows easy removal, for maintenance.
Working chambers
 Built in color steel tile, they are modulated in order to satisfy any dimension in height, width and length. Inside (except on the ceiling) there is a rubber coating that protects them against abrasion and helps in the acoustic insulation.
Horizontal transportation of abrasive material
This system combines the drive of scraper carts that conduct the abrasive material to the center of the working chamber, where it is collected by a screw conveyor (in some cases by a belt conveyor) which conducts the abrasive material up to the foot of the bucket elevator (abrasive materials purifier). On the whole floor surface, there is a grid that is covered with a perforated plate, which retains larger impurities or even small parts which may drop accidentally on the floor. This unique system used by CMV requires a much smaller installed power that the other systems, thanks to the friction coefficient (wear), which is much smaller in this system.
Control panel
Mounted on a shielded cabinet, it has thermal protection and interlocking for the motors, which makes it impossible to connect them in the incorrect order. Optionally, it is supplied with a PLC for the automatic control of the equipment. It meets the most important international standards, among which the 60204-1 of the EEC.
Blasting machine
It has a pressure vessel built in accordance with the EU standard, which is hydrostatically tested to operate at a pressure of 8 Bar (116PSI), with and outlet for one or more operators, with a remote pneumatic command and a full kit for the protection of the operator(s), and an air filter that is appropriate for human breathing. The machine also has a high-efficiency pneumatic system and high-performance nozzle(s). Optionally, it can be equipped with a level sensor for automatic feeding of abrasive material.
Abrasive materials purifier / Bucket elevator
The bucket elevator receives the abrasive in its hopper and lifts it to the purifier. The elevator features buckets in nodular cast iron that are highly resistant to abrasion and is driven by one gear motor. The abrasive materials purifier receives the abrasive material from the bucket elevator and, with a system that is adjustable through counterweights, forms a curtain with the abrasive material, through which an air stream passes, which is also adjustable, and which takes the dust and other residues that may be contaminating the abrasive material, to the exhaust system. The abrasive material, now free from impurities, drops into the silo that is located on the blasting machine. Optionally, the abrasive materials purifier can be supplied with a revolving screen.
Exhaust system
The combination of deflectors for air intake / outlet ensures an excellent operational visibility, and, due to their construction, eliminates the waste of abrasive material. Our model BMF-H dust collectors have cartridge filters with elements in Viledon(r), which, besides ensuring an extremely low volume of residual dust (approximately 2mg/m3), have a considerably long useful life (approximately 15,000 h of work). The cleaning of the filter system is done automatically by an electronically controlled pulse-jet system. Optionally, among other items, it is possible to supply the equipment with a noise damper / rear HEPA type filter, thus obtaining a volume of residual dust of about 0.4mg/m3.






Technical Parameter

Model	Size of room (mm)	Size of jobs (mm)	Spray gun quantity
EP060605	6000×6000×5000	3000×3000×2500	2
EP060606	6000×6000×6000	3000×3000×3500	2
EP080605	8000×6000×5000	5000×3000×2500	2
EP080606	8000×6000×6000	5000×3000×3500	2
EP100606	10000×6000×6000	7000×3000×3500	2
EP150606	15000×6000×6000	12000×3000×3500	2
EP150806	15000×8000×6000	12000×5000×3500	2
EP180806	18000×8000×6000	15000×5000×3500	4
EP181008	18000×10000×8000	15000×7000×5500	4
Spray nozzle caliber(mm)	Compressed air consumption(m3/min)	Sand consumption(kg/h)	Spraying area(m2/h)
φ6	2.2	650	6
φ8	3.92	1160	10.7
φ10	6.1	1800	16.7

FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the machine in stock. or it is 15-50 days if the Equipment  is designed for user request according to different type of work piece need to be cleaned.
Q: What is your terms of payment ?
A:  Payment Terms: T/T 30% as prepayment, 70% balance against the copy of B/L.
If you have another question, pls feel free to contact us