| Customization: | Available |
|---|---|
| After-sales Service: | Spare Parts, Field Installation, Commissioning |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
vulcanizer for rubber curing
The vulcanizing machine are divided into two series: steam vulcanizing boiler series and hot air vulcanizing boiler series. Each series has three heating mediums: steam, electric and conduction oil.
Our equipment which has advantages of stable and reliable performance is the most widely used steam vulcanizing boiler, the temperature, pressure and time can be controlled automatically and it also easy to operate. And the equipment can save 35% of energy than other traditional equipment.
Working principle for steam vulcanizing autoclave
The steam enter into the steam diffusion tube by entrance of steam which at the bottom of the steam vulcanizing boiler and the entrance can be controlled by automatic valve. The steam diffusion tubes vertical arrangement in the bottom of the tank. The small holes which diameters are 3mm,4mm and 5mm on the steam diffusion tube are arranged according to certain rules and angel to ensure that the steam spread in the tank evenly. Thus it can prevent the different quality of the product because of the uneven steam. After set working procedures, the heating, heat preservation, vulcanization and etc can be finished by automatic control system. The equipment stop working and give alarm after all procedures finished.
Working principle for electricity steam vulcanizing autoclave
Electric heated tubes are arranged in the bottom of the tank according to certain rules, the heat exchanger linked the electric heated tubes and the water channel. The height of the sink is 5~15mm. The steam which produced by electric heated tubes and water spread from down to up evenly until turn into condensate water pour into the sink after touched the wall of tank and then heat again. The temperature of the tank evenly and the pressure has no error, so it can prevent the different quality of the product because of the uneven temperature and pressure. After set working procedures, the heating, heat preservation, vulcanization and etc can be finished by automatic control system. The equipment stop working and give alarm after all procedures finished.
Technical parameter
|
Item |
800 |
1200 |
1500 |
1700 |
2000 |
2600 |
|
Inner diameter(mm) |
800 |
1200 |
1500 |
1700 |
2000 |
2600 |
|
Canister length(mm) |
22000 |
3000 |
3000 |
4000 |
5000 |
10000 |
|
Number of lid sawtooth |
12 |
12 |
14 |
14 |
16 |
24 |
|
thickness of lid (mm) |
10 |
10 |
10 |
10 |
16 |
14 |
|
Thickness of the tank body(mm) |
10 |
10 |
10 |
10 |
12 |
14 |
|
Working pressure(Mpa) |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
0.55 |
|
Dimensions(mm) (length*width*height) |
22766*1445 |
4010*1575 |
3960*2150 |
4925*2162 |
6200*2590 |
11722*3360 |
|
Weight(Kg) |
5580 |
2017 |
2950 |
3835 |
6500 |
16775 |
Ranges of application
It is mainly used for rubber tyre retreading, reclaimed rubber desulphurization, wire, cable, tape, rubber rollers and other rubber products vulcanization. styrene-butadiene rubber thermoplastic refining, drying wood, Chinese medicine sterilization, oxidation of aluminum products, carbonization of bamboo products, Also widely used in the gypsum and its products and other materials autoclaving.
){kind=link}