Sandblasting Booth Shot Blasting System Sand Blasting Chamber

Product Description

Product Description

Air Sand Shot Blasting Room/Sand blasting Chamber /abrasive blasting cabinet
 

          1,room

          2,sandblasting system

          3,abrasive recyling system

          4,abrasive separator

          5,dust collector system

          6,workpiece conveying system

          7,control system

 

 

Large structures can move inside the Blast Room on work cars sliding on rails.

Mainly composed with the Blasting Room, Air Blasting System, Sand Circulatory System, Dehumidify System and Dust Collector. 

 

1.Blast Room Enclosure Size 

Enclosure size is determined by the size of the largest part that will be blasted. Standard sizes range

from 8' by 8' square to 20' wide by 40' deep and up to 16' tall. Custom, larger sizes are available. 

2.Material Handling Method 

Parts are transported according to your plant operations and part specifications. Options for loading

parts into the blast chamber include forklift, work car on rails, dedicated monorail or overhead crane.

 

3.Work Door Configuration

The type of doors is determined by the material handling method, part size, plant operations and

budget. Door options include: double swing doors, roll-up doors and sliding doors. Drive through

systems with doors on both ends are available. 

4.Abrasive Reclaim System 

The reclaim system is determined by the type of abrasive being used, (screw conveyor vs.vacuum

reclaim), your production requirements and budget. Full reclaim floors are more costly but provide

continuous automatic recycling of abrasive. Partial reclaims and corner boxes require the operator

to sweep the abrasive to the reclaim system. If your parts are to be handled by forklifts, the reclaim

system must accommodate heavy floor loading. 

5.Control system

PLC control, Error warning system on abrasive circle system, any error come, ll the above work will

stop automatic.Control function under Automatic control, hand controller and maintenance states will

be control, so there are cascading protection feature among each process.

 

6.dust remove system

Abrator dust stream generated when working through the primary separator and connecting pipe,

and then flow into the deposition of dust box, large particles are deposited, a small pipe into the dust

and then by pulse jet bag filter. Emissions of dust concentration after not more than 80mg/m3, in line

with the provisions of the National Environmental Protection Agency emission standards not higher

than 120mg/m3.

 

7. Shot distributing system

This machine adopts the patented shot valve produced of our company; it can accumulate a certain

time in blast-peening, through the manual control to provide the shot ball to the blast-peening device.

 

Product Parameters

This machine is not a standard machine, any parameters can be customized according clients' requirements, so any further information please contact with us, our skilled engineer team will give you the most professional and cost-effective solutions.

Max. Workpiece size (L*W*H)	7*3.5*2.5 m
Max. Workpiece weight	Max. 5 T
Finish level	Can achieve Sa2-2 .5 (GB8923-88)
Processing speed	30-60 m3/min (Operator start different blasting guns quantity)
Surface roughness	40~75 μ (Depend on abrasive size)
Suggest abrasive	Grinding steel shot, Φ0.5~1.5
Sand blasting room inside dimension (L*W*H)	15*8*6 m
Electric power supply	380V, 3P, 50HZ or customized
Pit requirement	Waterproof

 

Application Area

ET BLAST has built up invaluable experience in solving customers cleaning problems, the main industries such as:
* Steel structural works (industrial and railway vehicles, agricultural and construction machines, earth moving machines, windows and door frames, tanks, pipe line plant, building and harbour crane, etc)
* Castings, forgings, weldments, heat treatment device, including the fragile and irregularly shaped workpieces; 
* Tampings, gears and springs of surface cleaning, shot peening, tumbling and vibratory finishing;
* Marine / Ship Building and Repair Industries.

Detailed Photos

Intelligent designs ,innovative details and particularly durable components --- that is what our shot blasting equipment stands.

CLIENT VISITING

There are our customers from all over the world to visit us and consult surface treatment issues .

Packaging & Shipping

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

1.Small spare parts put in plywood wooden cases
2. Other parts is our company standard or according to customer requirements
3. Shipping: Container transport

Company Profile

 ET BLAST , is a professional manufacturer of shot blasting machines and shot peening machines. Our machine lines cover hook shot blasting machine, tumble shot blasting machine, roller conveyor blasting machine, blasting room, and shot peening machine, which widely used for surface finishing & surface cleaning in aerospace, automotive, shipyard, railway, forge and foundry, steel pipe,steel structure, aluminum and other industries.

FAQ

Q:How to choose blast machine type?
A:According to work-piece size & material and productivity
Q:What kind of abrasive for shot blasting machine ?
A: steel shot, steel grit , cut wire shot, stainless steel shot, etc.
Q:Quality warranty?
A:1 year and please find our agent in your local ,they would supply long-term after-sales service .
Q:Is foundation pit essential?
A:Up to machine size and workshop
Q:How many workers to operate the machine?
A:1 Operator
Q:Install assistance?
A: Installation tool and experience workers for operation training
Q:After sale service?
A:Full stock for spare parts, regular after sale service by local agent.

Contact With US
My friend, if you are interested in our products, our company and factory, you can contact us right at now! our beautiful good

salesman will give you the most sincere service and the most satisfactory answer!
Looking forward to contact Victoria!