| Customization: | Available |
|---|---|
| Warranty: | 2 Years |
| Control Type: | CNC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Vertical Single-Pole Rubber Bale Cutter with BV ISO SGS
vertical hydraulic guillotine nature rubber bale cutter
1.Mainly uses
The bale cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber.
The cutter is matched with working track, which makes rubber feeding much more convenient.
2.structure
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife.
When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber.
Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder
3.Characteristics:
1. low noise
2. constant temperature
3. automatic pressure mataining and pressure supplement
4.It has solid construction, reasonable design, high production efficiency, easy operation.
5. Cutting knife is controlled by hydraulic system, and reciprocating motion.
6.CE standard ISO9001 certified
4.Parameters of the Hydrulic Rubber bale cutter
|
type |
XQL-8 |
XQL-16 |
|
Width |
660 |
1000 |
|
Stroke |
680 |
680 |
|
Diameter of the piston |
150 |
200 |
|
Time Taken by the Stroke |
16 -- 25 |
10 -- 16 |
|
Power |
5.5 |
5.5 |
|
Weight |
1500 |
2000 |
This machine is designed for cutting belts of natural rubber and other plastic materials.
Structure characteristics:
1. Rigid constrution, reasonable design, high efficiency and easy operation.
2. Cutter's up-and-down reciprocating motion controlled by hydraulic sytem.
| Type | XQ-800 | XQ-600 |
| Cutter width | 780 mm | 580 mm |
| Cutter stroke | 700 mm | 700 mm |
| Flow | 80L per min | 80L per min |
| Pressure | 61.8 MPa (63kg/cm²) | 61.8 MPa (63kg/cm²) |
| Motor | 5.5 kw | 2.2 kw |
If you interested in our products mentioned above. Kindly let us know by return email. Then I will supply you with further information. Meanwhile, welcome to our factory to visit and inspect.
| Type | XQL-80 | XQL-120 | XQL-125 |
cutter width (mm) |
660 | 760 | 760 |
cutter Stroke (mm) |
680 | 680 | 680 |
Total Pressure of cylinder(KN) |
80 | 120 | 125 |
Time taken by of stroke (S) |
14-16 | 13-16 | 13-16 |
Motor Power(kw) |
5.5 | 11 | 14 |
Overall Size (LxWxH) mm |
2122x1440x2509 | 1950x1400x2338 | 2300x1500x2530 |
Weight (kg) |
1600 | 2000 | 2600 |
Vertical Single-Pole Rubber Bale Cutter with BV ISO SGS
vertical hydraulic guillotine nature rubber bale cutter
1.Mainly uses
The bale cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber.
The cutter is matched with working track, which makes rubber feeding much more convenient.
2.structure
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife.
When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber.
Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder
3.Characteristics:
1. low noise
2. constant temperature
3. automatic pressure mataining and pressure supplement
4.It has solid construction, reasonable design, high production efficiency, easy operation.
5. Cutting knife is controlled by hydraulic system, and reciprocating motion.
6.CE standard ISO9001 certified
4.Parameters of the Hydrulic Rubber bale cutter
|
type |
XQL-8 |
XQL-16 |
|
Width |
660 |
1000 |
|
Stroke |
680 |
680 |
|
Diameter of the piston |
150 |
200 |
|
Time Taken by the Stroke |
16 -- 25 |
10 -- 16 |
|
Power |
5.5 |
5.5 |
|
Weight |
1500 |
2000 |
This machine is designed for cutting belts of natural rubber and other plastic materials.
Structure characteristics:
1. Rigid constrution, reasonable design, high efficiency and easy operation.
2. Cutter's up-and-down reciprocating motion controlled by hydraulic sytem.
| Type | XQ-800 | XQ-600 |
| Cutter width | 780 mm | 580 mm |
| Cutter stroke | 700 mm | 700 mm |
| Flow | 80L per min | 80L per min |
| Pressure | 61.8 MPa (63kg/cm²) | 61.8 MPa (63kg/cm²) |
| Motor | 5.5 kw | 2.2 kw |
If you interested in our products mentioned above. Kindly let us know by return email. Then I will supply you with further information. Meanwhile, welcome to our factory to visit and inspect.
| Type | XQL-80 | XQL-120 | XQL-125 |
cutter width (mm) |
660 | 760 | 760 |
cutter Stroke (mm) |
680 | 680 | 680 |
Total Pressure of cylinder(KN) |
80 | 120 | 125 |
Time taken by of stroke (S) |
14-16 | 13-16 | 13-16 |
Motor Power(kw) |
5.5 | 11 | 14 |
Overall Size (LxWxH) mm |
2122x1440x2509 | 1950x1400x2338 | 2300x1500x2530 |
Weight (kg) |
1600 | 2000 | 2600 |
5.Genernal introduction of our conpany
Qingdao Evertech Industry Co.,ltd is one of the important backbone of enterprises in rubber machinery industry in China. It is one member of Shandong Machinery Union Company. The company owns powerful technical strength, advanced technics, the best design and strict quality guarantee system, which owns a high reputation in China rubber machine industry.
){kind=link}